Model C5112/C5116/C5120, C5123/C5126 series of single column vertical lathe, which fine grounded gears in the gearbox to ensure high precision, low noise and long life. Versatile accessories and good service. Just start production immediately after got it. Many options, German MECANO panel box, roller guideway table, higher table stand, etc.

 

 

Specification		Unit	C5112	C5116	C5120	C5123	C5126
Max.cutting diameter of vertical tool post		mm	1250	1600	2000	2300	2600
Max.cutting diameter of side tool post		mm	1100	1400	1800	2000	2400
Max.cutting height		mm	1000	1000/1400	1250	1350	1600
Work table	diameter	mm	1000	1400	1800	2000	2250
	max. loading	t	3.2	5	8	8	10
	speed range	rpm	6.3-200	5-160	3.2-100	3.2-100	2-63
	step range	step	16	16	16	16	16
	max. torque	kn. m	17.5	25	25	25	35
Vertical tool post	feeding rang	mm/min	0.8-86	0.8-86	0.8-86	0.8-86	0.8-86
	feed steps	step	12	12	12	12	12
	cutting force	kn	20	25	25	25	25
	vertical travel	mm	650	800/1000	800/1000	800/1000	1000
	horizontal travel	mm	700	915	1200	1300	1500
	swing angle	°	±30	±30	±30	±30	±30
Side tool post	feed range	mm/min	0.8-86	0.8-86	0.8-86	0.8-86	0.8-86
	cutting force	kn	20	20	20	20	20
	vertical travel	mm	900	900	900	900	900
	horizontal travel	mm	630	630	630	630	630
Cross beam travel		mm	650	650/1050	850	1050	1250
Beam lifting speed		mm/min	350	350	350	350	320
Tool bar section size		mm	30*40	30*40	40*40	40*40	40*40
Main motor		kw	22	30	30	30	37
Machine weight		t	8.5	12.4/14.8	17	18	26/28
Overall dimension(L*W*H)		mm	2360*2280 *2800	2830*2670 *3010	3200*2800 *3250	3210*2850 *3300	3300*4000 *3500

 

 

1. Advance modular Design based on FEM. Integrated mechanical, electrical and hydraulic tech.

niques, Guarantee excellent machining performance.

2. High grade casting from own foundry, Good heat treatment process, Hardened guideway(above HRC50). Perfect long lifetime and stable accuracy.

3. Turret indexed by curvic coupling with 120 divided teeth, more rigid than traditional 5 divided coupling plate.

4. PLC control made by OMRON Japan fine layout and cabling in cabinet. special careful selected components for super reliability.

5. Two axis DRO and scales is standard.

6. 16 steps speeds change by electronic valve controller, easily, sensitively and reliably.

 

 

The worktable adopts a dynamic pressure guide rail, and its main shaft is equipped with two NN3000 type double row short cylindrical roller bearings. The inner ring has a taper to adjust the radial clearance. Both bearings have oil flow for lubrication and ensure the axial and radial accuracy of the worktable. There are four manual jaws on the worktable.

 

The vertical column is connected with the base of the worktable, and its material is made of high-strength, low-stress cast iron, and a beam lifting mechanism is provided at the upper end of the column. Driven by an AC motor, the beam moves up and down on the vertical column.

 

Single column vertical lathe is suitable for high-speed steel cutter, carbide cutter and all kinds of high performance cutter, which can make rough and finish turning for inside and outside cylindrical, conical, end face, grooving and etc.

The lubrication method mainly adopts centralized lubrication station for timing and quantitative centralized lubrication.

 

 

GB9061-1988 metal cutting lathe general technical conditions

GB/T23582.1-2009 vertical lathe accuracy inspection

 

 

http://www.haidimachinery.com/